Available Colors
We recommend ordering Fabric Samples – all computer screens are slightly different and the only true way to know what you’re getting is to see the fabric in person.
Uncategorized
Product Features
- Designed for easy installation
- High (up to 99%) UV block and high shade factor
- Lightweight (200grm)
- 9 Designer Colors
- Unique and durable construction
- 10 Year Warranty against UV degradation
Product Description
Skyclipse 200 Series shade sails are built to last, easy to install and provide maximum shade reducing heat, glare and UV radiation of any outdoor area, allowing you to use the outdoors even when the sun is at its most dangerous. The Z16 fabric holds an unrivaled reputation for durability, UV-R protection and quality. Sails are made with a unique high quality South Africa fabric that we find ideal for smaller Shade Sails with perimeters under 80’ around or less. Easier to install with a bit more stretch make them ideal for the DIY installer. The fabric is one of the most UV blocking fabrics we have used and has a smoother finish than other knits. Super strong reinforcing polyester webbing is sewn to bottom of the sail edge using SolarFX UV resistant thread. A very strong UV stable sail that will out last most anything on the market.
Recommended hardware for Skyclipse 200 shade sails
Hardware
We offer Hardware Kits specifically designed for Skyclipse 200 Shade Sails. These kits work for MOST applications as they assume a 2 building attachment (eye plates) and 2 post attachment (6″ eye bolts) layout. Please check with your contractor or email megan@shadesailsllc.com with questions about your design.
The dimensions shown DO NOT include tensioners or fixings. REMEMBER TO ALLOW FOR HARDWARE WHEN INSTALLING FIXING points. (We recommend your footprint be at least 18″ bigger)
To achieve that taut tensile fabric look, you need to start out with a sail that is properly made and installed correctly. These Shade Sails are of our own design and are not available anywhere else in the USA. Our hardware is intended for tension loads and are load rated. We have pull tested our sails at over a ton of force. Combined with our “load rated” hardware the systems we offer are designed to give you a trouble free installation. These are serious tensioned fabric structures not a picnic tarp!! The Skyclipse 200 Series range is another comprehensive range of ready-made shade sails, offering top quality DIY shade at very competitive prices.
With multiple sizes and colors to choose from, the combinations are endless! This design is relatively simple but they are built to last. The Skyclipse 200 Series features Shadetex 200 fabric with double reinforced corners and sturdy 316 stainless steel D-rings.
Stated Sizes Are Nominal Measurements From Ring To Ring Under Tension.
Please check with your local building authorities regarding applicable building codes in your area. Custom made sails are recommended for public or commercial applications.
View our Helpful hints page for planning your installReturn Policy
Skyclipse 200 sails are made to order from stock patterns.
Some Skyclipse 200 sails are not returnable. Please make your selection with care.
View Our Return policyShipping
NOTE: Skyclipse 200, are shipped via United States Postal Service. Providing a valid USPS delivery address is the responsibility of the customer. Any losses due to provision of an invalid delivery address are the sole responsibility of the customer.
_
Goods received damaged or defective will be replaced upon return. Email returns@shadesails.com before returning to acquire return shipping labels.
