This content is password-protected. To view it, please enter the password below.

Step 1 - Edge and Corner Construction

  • Webbing Reinforced

    Webbing Reinforced Recommended

  • —OR—
  • Cabled Reinforced Edges

    Cabled Reinforced Edges

Select Type of Construction:

Step 2 - Fabric and Color

Monotec - Strongest in the industry.

ExtraBlock - Fire Rated - Eye catching colors that comply with California State Marshals requirements - cost 15% more.

Shadetex - Less expensive with additional color choices (inappropriate for sails with perimeters greater than 80' around).

Select Fabric:
Select Color:
    Please select a type of fabric.

    Step 3 - Number of Corners

    Sails with more than 4 corners require manual order form.
    Select Number of Corners:

    Step 4 - Edge Dimensions

    Caution: Please read our measuring instructions. Note that we adjust the size of the sail for turnbuckles and shackles that come with the sail. (Not You)

    Dimensions
    Enter Edge Dimensions (in inches):
    Please select the number of corners first.

    Step 5 - Fixing Points Heights

    Enter in the height measurements of the fixing points heights above grade (above the ground). Estimates can be made to the nearest half foot.

    Dimensions
    Enter Fixing Points Heights (in inches)
    1. inches Fixed to post or building?: Post Building Is the eye horizontal or vertical: Horizontal Vertical
    2. inches Fixed to post or building?: Post Building Is the eye horizontal or vertical: Horizontal Vertical
    3. inches Fixed to post or building?: Post Building Is the eye horizontal or vertical: Horizontal Vertical
    4. inches Fixed to post or building?: Post Building Is the eye horizontal or vertical: Horizontal Vertical

    Step 6 - Final Questions

    1. Did you buy your eyes from us? Note: To be eligible to receive our warranty, it is required that our hardware be used exclusively.
    2. I have measured per your instructions. Acknowledge:
    3. I understand that the edges curve inward to control tension throughout the membrane. Acknowledge:
    4. I acknowledge reading your return policy. Acknowledge:
    5. I acknowledge that flat sails will not drain well and can void the warranty. Acknowledge:
    6. I acknowledge that ShadeSails.com LLC will determine turnbuckle/shackle locations and adjust the sail dimensions to accommodate them. Acknowledge:
    7. I acknowledge that Shade Sails LLC is not responsible for poor shapes that result from the measurements I have provided. Acknowledge: